PDA

View Full Version : Marshall ED-1

AtomicMassUnit
10-24-2006, 05:22 AM
Anyone got a schematic for this? the 'compression' pot got destroyed and I'm trying to find the value to replace it.
Steve Conner
10-25-2006, 12:30 PM
Can't you just open it and look? The value should be printed on the pot.
AtomicMassUnit
10-27-2006, 02:20 AM
That was my first idea, but it's not printed on the pot. Second idea... post on ampage and see if anyone has a schematic. Thanks for the help. I'm gonna call Korg and see if I can't get one from them.
Steve Conner
10-27-2006, 11:04 AM
If you can't get a schematic, I'll open up my ED-1 and measure the pot with an ohm meter for you. (did it really get destroyed so bad that you can't measure it?)
Enzo
10-28-2006, 05:24 AM
Well, I just went to my dealer site to download the data, and all it will tell me is that it is a "replace only" unit. Also the parts list is a blank page.

I don't know what destruction you face, but I have been known to disassemble a pot and measure the resistive stripe even though the part with the terminals had been broken off. In fact I take apart quite a few pots and save a goodly percentage of them.