JC@
06-22-2006, 12:58 PM
www.triodeel.com/u67pre.gif
The schem is not very clear, btw
At conector #5 in the 'head' I don't get +120 volts
At conector #1 in the 'head' I don't get +59 volts (I get more or less, 7 volts.
The power supply works.
The mic works. All the voltage measurements are correct except on those points mentioned above.
???
Any help, please?
Thank you.
JC
The schem is not very clear, btw
At conector #5 in the 'head' I don't get +120 volts
At conector #1 in the 'head' I don't get +59 volts (I get more or less, 7 volts.
The power supply works.
The mic works. All the voltage measurements are correct except on those points mentioned above.
???
Any help, please?
Thank you.
JC