Custom 64' Super reverb pics

[truetone]

heres what I've been working on. I'm going to put two 15" JBL D130F speakers and I'll more than likely be reconing them with 4ohm kits. This thing is huge. I figured I'd have a little fun.

http://i24.photobucket.com/albums/c25/Cole_01/Picture085.jpg

http://i24.photobucket.com/albums/c25/Cole_01/Picture084.jpg

[bob p]

you're gonna put wheels on that thing, right? :p

[truetone]

:D might need gokart tires

[NightWinder]

What is that, Birch? Make a kickback, so it can get tilted on its wheels. +1 for gokart wheels.

[truetone]

its pine, got it from homedepot. it was the cheaper stuff, paid 15$ total. I was looking at some on ebay, premade and kits and I figured I could do it for cheaper and it gave me the fexability to make what I want. I was trying to figure out what to use for a kickback, but that is a good idea.

[NightWinder]

its pine, got it from homedepot. it was the cheaper stuff, paid 15$ total. I was looking at some on ebay, premade and kits and I figured I could do it for cheaper and it gave me the fexability to make what I want. I was trying to figure out what to use for a kickback, but that is a good idea.

I thought you were building a Head. Either way. I would put big wheels on there, and buy a few safty straps for wrappin around the wheels and the whole cabnit (like a trailer strap for 4 wheelers (2) that completely goes around the bottom and over the tires) to stop any Unwanted vibration while playing. Check this Marshall 800 2 channel 2205, completely redone preamps. The Transformers are original Drakes that came in it. "83.
BTW, Pine has some great frequencys.... Make sure you use it on the front and back.

[truetone]

would it be a problem to make the baffle board out of laminated pine, there solid pieces just glued together to make a larger piece.