PDA

View Full Version : Amp Safety tips and procedures...


amp boy
05-18-2007, 01:26 AM
hey everyone,

i myself am new to amp building, and i am ready for the work.
what is holding me back a bit, is my regard for safety.
the AX84 site links up to the Drifter amps site for the safety article, however the drifter site is down. i have been told by a few people that i should read over and take in that article. unfortunatly i am unable to due to not being able to have access to it.

does anyone have it copyed for refference, or know of other net links, articles i should look into.

i appreciate your time and aid in helping me and others approach guitar amplification.
- amp boy.

stokes
05-18-2007, 01:58 AM
www.aikenamps.com has a section on amp safety.Click on the tech info,then the "Introductory" under Technical Papers.

amp boy
05-20-2007, 04:13 PM
from Wakarusa Amplification, and thanks to him:

"I always advise folks to start with the Navy Electricity & Electronics Training Series (NEETS). The USN has been using these to teach electricity to folks with not enough brains to stay out of a recruiter's office ever since dirt was rocks.

You can get 'em all at: http://www.wakarusaamp.com/library/m...ETS/neets.html"

steve
05-20-2007, 04:53 PM
from Wakarusa Amplification, and thanks to him:

"I always advise folks to start with the Navy Electricity & Electronics Training Series (NEETS). The USN has been using these to teach electricity to folks with not enough brains to stay out of a recruiter's office ever since dirt was rocks.

You can get 'em all at: http://www.wakarusaamp.com/library/m...ETS/neets.html"

Here is the actual link:

http://www.wakarusaamp.com/library/manuals/NEETS/neets.html

steve