Need some help with three things...

[Learner]

A. I've got this killer little set of Atomic I Humbuckers. My problem I'm having is finding the wiring schematic to both switch it to a Two Volume pot one Tone pot switch with a Pick-up switch. Also, do I need to use the old Pots from my Toronado that I ripped them from?

B. I'm putting them in an old Mako Explorer model. Any input on the idea?

C. Any one know a good way to tear into the finish on that thing? I've used a full can of Citri-strip and about 1/5 of a gallon of Zip-Strip. I've FINALLY broken through and have just the back mostly cleaned up.

Any help on ANY of my problems would be greatly appreciated. I kinda ran blindly into this. :D

[TD_Madden]

this might help

two vols, 1 tone, 3-way-switch:

http://www.seymourduncan.com/support/schematics/2h_2v_1t_3w.html

two vols, two tone, 3-way switch:

http://www.seymourduncan.com/support/schematics/2h_2v_2t_3w.html

[Jerry]

Do you have a hot air gun? Try melting it. I had a guy
paint a guitar for me a few years ago. Recently I decided
to go back to a more traditional finish. He'd told me that it
was very difficult to remove the finish. I put the gun to it and
it came off VERY easily. Of course, YMMV. Good luck!

[Learner]

Do you have a hot air gun? Try melting it. I had a guy
paint a guitar for me a few years ago. Recently I decided
to go back to a more traditional finish. He'd told me that it
was very difficult to remove the finish. I put the gun to it and
it came off VERY easily. Of course, YMMV. Good luck!

Thats a DAMNED good idea! Thanks much, man. That should work GREAT! :D