introducing delcano 45 by scott amplification

[scole]

ok so its only a 5f4
http://pg.photos.yahoo.com/ph/scole90/album?.dir=e709re2&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/ph//my_photos

[Bruce / Mission Amps]

Just a 5F4?
The 5F4 (and the like) is still one of my favorite tweed Fender amps....
I think they are right at the very start of what we think of as modern sounding, vacuum tube guitar amps.

[tubelovin]

How did you make the board? Did you make your own template, or buy one?

[scole]

i made the board myself, since this amp is a reverse layout like a jtm45, i drew the board with a cad program, printed it out, taped it to the board material and drilled. i ordered the eyelets from mouser. i counter sink the bottom side of the holes, i used a large center punch to flare the eyelets into place. the center punch and the couner sink are the same angle. the board material comes from mcmaster carr. if you need a drawing of the board let me know.

[tubelovin]

What type of material is it? How much did you pay? I'm interestede in making my own boards, because I keep getting crappy boards from mojo. I think I would like to go with black though. I checked out that mcmaster carr site lots of good stuff there, thanks for the info.

[scole]

heres the part number 8557K152, its 9 dollars, 1/8 thick, 3 inches wide by 24 inches long, enough to make two boards.