PDA

View Full Version : ID odd components in bell and howell amp?


lexluthier72
01-12-2008, 03:20 AM
Hey Folks,
I have encountered some odd components, what I thought was a couple capacitors, but they have a code I am not familiar with. From what I can gather on the internet, they may be an old wire wound resistor, but still its a code that I have never seen. They are tubular, and have a numeric code as follows: 17040 10-250v dc There are no other markings on them. all 4 have a different 5 digit number. I dont have access to the amp, so no photo. any help would be great.
-Erin R.

Enzo
01-12-2008, 03:40 AM
Always useful in these cases is: what does it connect to?

And: what model is it, in case someone here has the schematic?

From the numbers alone I would predict a 10uf 250v electrolytic cap.

lexluthier72
01-12-2008, 03:46 AM
I can find out tomorrow...I dont have the amp in front of me :( Just thought someone may recognize the code. I can hopefully have a photo tomorrow.
-Erin

lexluthier72
01-14-2008, 03:43 AM
Hey,
Heres a photo of the mystery component....any idea how to translate the number?
-Erin

trevorus
01-14-2008, 03:59 AM
That's a 10uF 250V electrolytic capacitor. Be careful, those can hold quite a zap!

lexluthier72
01-14-2008, 04:02 AM
I see it now....doh.
-E.