Loop switching via relay

[tubetonez]

I wonder if anyone can point me to information on designing a relay switching circuit. I'm very familiar with the true bypass loops, A/B switching, stereo loops etc. that you can do with typical 3PDT or 4PDT switches. What I want to do is be able to have multiple loops, and the ability switch between them. For example, with three loops and three switches - pressing switch 1 activates loop 1 only, switch 2 activates loop 2, switch 3 activates loop 3. Only one loop is engaged at a time, there is no bypass. So you can go directly to any of the 3 loops. I'd appreciate any suggestions.

[R.G.]

Not a GEOFEX reader, I see.

Go read about the programmable effects switching systems at GEO (http://www.geofex.com). There are several there.

[tubetonez]

Thanks R.G., yes I had seen that article before, forgotten where it was. There is only one programmable system discussed there that I can find? It looks like it will be more effort than I want to put into it, I think the Voodoo Labs Pedal Switcher/Commander combo is pretty much what I need and not too expensive.

[R.G.]

How many do you need?

You didn't read ASMOP*?




*A Simple Matter Of Programming