Does anyone see anythign wrong w. this schematic?

[Audio_Gnostic]

Hey, everyone, im working on modding a synthesizer, i know none of you are probably familiar with the paia fatman synth, but for those of you who can read schematics fairly well, im wondering if you could tell me if there is any mistake in these step by step instructions vs the schematic they have up here, i dotn think you need to know the exact project to understand this.

http://www.joness.com/fatman/asr.htm

in the last steps it tells you how to wire the switch, either i cant read the schematic right or it looks like its different from the directions it gives me, because i followed the directions and this doesnt work right!?:confused:

[52 Bill]

in the last steps it tells you how to wire the switch, either i cant read the schematic right or it looks like its different from the directions it gives me, because i followed the directions and this doesnt work right!?:confused:

The first step of wiring the switch instructions sez to connect lug 1 + 4 to lug 1 of R115. The schematic shows them going to ground. One side of the pot R115 is grounded, so I assume that it is being used as a convenient ground point.

All the rest of the instructions regarding the switch seem correct.