Question about Vox AC30cc2 Reverb Tank

[adam32790]

Hey guys, I got a question about replacing the reverb tank in my Vox AC30cc2. I know that the Belton website has them but I was wondering if there was any easier way to go about doing this. Thanks

Tyler

[Enzo]

Easier than what, ordering the part?

The Belton is a BL3EB3C1B. If you can't find one of those, replace it with an Accutronics model :
4EB3C1B, 9EB3C1B, or 8EB3C1B

And if those are not immedaitely available, change the fourth character to a 2. A 4EB2C1B wil work fine and have an ever so slightly shorter reverb time.

[adam32790]

Ya but how do you order it, cause i tried it and you have to send a request or something.

[Enzo]

You can't order parts right from Belton any more than you can order parts for a car directly from GM.

You can order the Vox part from a Vox dealer. Or from a place like Parts is Parts who are located at www.marshallparts.com. And for the Accutronics versions, I'd use AES located at www.tubesandmore.com. Those will be less expensive that Vox parts.

[adam32790]

Hello again, I can't seem to find it on those sites. Will different models work, cause they aren't the exact same model number but look very similar. Also, if I were to fix ripped grill cloth on the amp how could I do that? The upper left corner of the grill cloth is coming undone right below the vox symbol. Would I have to buy a whole new roll of cloth or could I make do with gluing it back? Thanks,

Tyler