PDA

View Full Version : Can someone give me an assist with a TU-2, please?


TheElectricMoron
10-18-2006, 09:00 PM
The one I have has two wires broken off the jacks, a yellow wire and a brown wire. They have obviously broken off of the input jack and the output jack. If you could pull the back off one of those things and tell me which wire goes to which jack I'd really appreciate it. I know I have a 50-50 chance of just sticking it together and being right, but what with my luck ..... And I really prefer to just pull it apart one time hahahaha

many thanks
Charlie

cjlectronics
10-20-2006, 03:11 PM
The brown wire does to the input jack.
The yellow wire goes to the bypass jack.
The white wire goes to the output jack.

Hope this helps!
CJ

TheElectricMoron
10-20-2006, 05:00 PM
CJ,

That's just what was needed. I appreciate the PITA I know it is to pull something apart for no good reason.

Many thanks it's up and running again just fine.

Charlie