PDA

View Full Version : The Tube Cube


JC@
10-20-2008, 01:25 PM
How safe it is using one of these attenuators?
Anybody?

Regis
10-20-2008, 03:16 PM
Not sure about the higher wattage ones he builds, but I'm betting the small one is just like my Ampwell House Attenuator (http://www.regiscoyne.com/ampwell/)I built using an L-Pad from Parts Express. The AHA is good for up to about 25-30 watts rms.

I've also built one with the dual ganged 8 ohm L-Pad that can be switched between 4 and 8 ohms.

As long as you don't exceed the attenuators wattage rating it will be safe. Be aware that driving your amp hard like that will wear out tubes faster.

JC@
10-20-2008, 03:45 PM
Thank you Regis.