Tweet
My cousin has a Punk Rock band, and his singer gave me this head to repair. It turns on just fine, but there's no output. I checked a few of the resistors, and I know for certain one is bad. But not completely dead -- the marked resistance was 270ohm, and it's at 90-something-ohm. (R101) Would make it so there's no output?
-
-
Sam Ash sells these, and I don;t know who else. COnsidering the amp head and speaker cab can be had as a stack for $199 leads me to think not a ton of documentation will be out there. But CONTACT Sam Ash and ask if any support is available and if schematics are as well.Education is what you're left with after you have forgotten what you have learned.
Comment