Tweet
If anyone has a footswitch schemo, or would be willing to put the wiring scheme on paper for me and supply that, I'd be greatly appreciative!
I purchased a used Tech 21 Trademark 60 amp and it did not come with the three-button footswitch. I can use a standard open/close switch to change from one channel to another but without the three switch circuit I'm missing lots of flexibility including controlling the boost circuit and FX loop remotely.
I've only found this switch available direct from Tech 21's web site at $100 cost, which I believe is too pricey for a purely mechanical switch. It uses a two pole standard 1/4" plug.
Again, any help or suggestions are appreciated! Thanks.
I purchased a used Tech 21 Trademark 60 amp and it did not come with the three-button footswitch. I can use a standard open/close switch to change from one channel to another but without the three switch circuit I'm missing lots of flexibility including controlling the boost circuit and FX loop remotely.
I've only found this switch available direct from Tech 21's web site at $100 cost, which I believe is too pricey for a purely mechanical switch. It uses a two pole standard 1/4" plug.
Again, any help or suggestions are appreciated! Thanks.
Comment