Announcement

Collapse
No announcement yet.

Flat pickup winding jig

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flat pickup winding jig

    My home made flat pickup winding jig.

    I just stick it to my winder plate but I can put a screw through it a use it in a drill as well. It is made from perspex with an aluminium channel attached to it and 2 spacers to protect the wire from the clamping screws.

    I hope this is of some use.

    regards

    Walt
    Attached Files
    I know the voices in my head aren't real..... but man, sometimes their ideas are just brilliant.

  • #2
    Great idea. Is the channel set down into the perspex or double sided taped to it ?

    Comment


    • #3
      The channel is double sided taped to it with a screw through the center. Just tape won't hold it.

      The plate can be made out of any material and it doesn't need to be round, I made mine round because I have a lathe, and I can.

      Counter sink the channel and use a long screw to use it with a drill.

      In fact if you're gonna use it in a drill you won't even need the plate, just the channel with a long screw through it.

      I know it's a little crude, but it works well, however no doubt there are better ideas out there.

      Walt.
      Last edited by walcen; 01-06-2017, 12:53 AM. Reason: Add text
      I know the voices in my head aren't real..... but man, sometimes their ideas are just brilliant.

      Comment

      Working...
      X