Jbl eon 510 won't turn on

[bigdrums925]

I am having problems with the startup on a JBL Eon510 also. I happen to have 2 boards for this particular speaker and have replaced Q505 & Q506 on each of them. They were shorted. But so far no startup. I have read the solution outlined in another post but frankly its a little over my head. I have checked the voltages on U603 & U608 which at the time showed about -104vdc on each of the 7-8 pins. One is pin is +104vdc Seemed odd and I'm not sure I was measuring correctly. I was wondering if anyone here might guide me through this?
Thank you

[bigdrums925]

I could really use a schematic at this point if anyone knows of one.

[Sowhat]

I could really use a schematic at this point if anyone knows of one.

Here's an EON515 Schematic, don't know if this will exactly fill the bill...

E515 PWA Sch.pdf

If this is it, then page 3 is where you want to start, it's the page with SMPS at the top, this is what turns on or don't turn on depending on certain situations.