Announcement

Collapse
No announcement yet.

Marshall AVT150H trouble

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Marshall AVT150H trouble

    I am having problems with my AVT150. The power switch light and fans turn on, but the LEDs on the front do not and nothing else works. I have tried changing the tube, but that did not do anything (never hurts to have a spare i guess...) The other people that have posted have had working LEDs, so my problem must be different. Any suggestions would be greatly appreciated.

    Thank you!

    john

  • #2
    I'd have to say you're missing power supply voltages. There are both +/-15VDC rails for the op amp ICs and there is +5vDC for the switching logic. Make sure they are present.
    Education is what you're left with after you have forgotten what you have learned.

    Comment

    Working...
    X