Tweet
Hi.
Loving the musings here! What a place!
I have a 50 watt thingummy with a large transformer coupled in a cabinet with a collaro tape transcriptor. Iamwondering if with no preamp I can just plug my guitar into an active di box input rca made for connecting to it.
Haven't bought said box yet, here are some stats:
Frequency Response 5-35 kHz, -3 dB
Noise Level (22-22kHz, Input Shorted) -104 dBu
THD + N (10 Hz -22 kHz) 0.013% typ. @ 1 VRMS,1 kHz.
Input Impedance (GTR) > 1 Meg. Ohm
(SPK) 10 k Ohm
Max. Input Level (1% THD) +8.1 dBu ( 9v. Batt.)
+11.3 dBu (48v. Phantom)
GTR/SPK Input 1/4ʺ Phone Jack, unbalanced
OUTPUT/LINK 1/4ʺ Phone Jack, unbalanced
BALANCED OUTPUT XLR Connector, balanced
Phantom Power 24-48 VDC
Battery 9 Volt
Dimensions
Loving the musings here! What a place!
I have a 50 watt thingummy with a large transformer coupled in a cabinet with a collaro tape transcriptor. Iamwondering if with no preamp I can just plug my guitar into an active di box input rca made for connecting to it.
Haven't bought said box yet, here are some stats:
Frequency Response 5-35 kHz, -3 dB
Noise Level (22-22kHz, Input Shorted) -104 dBu
THD + N (10 Hz -22 kHz) 0.013% typ. @ 1 VRMS,1 kHz.
Input Impedance (GTR) > 1 Meg. Ohm
(SPK) 10 k Ohm
Max. Input Level (1% THD) +8.1 dBu ( 9v. Batt.)
+11.3 dBu (48v. Phantom)
GTR/SPK Input 1/4ʺ Phone Jack, unbalanced
OUTPUT/LINK 1/4ʺ Phone Jack, unbalanced
BALANCED OUTPUT XLR Connector, balanced
Phantom Power 24-48 VDC
Battery 9 Volt
Dimensions