Tweet
Fostex MR16HD/CD not starting
The unit attempts to start, but the PSU is inhibited after a second because a signal to hold the power up doesn't appear as it should from the CPU.
I've confirmed the PSU outputs are ok, as are the 3v3 and 1v8 supplies to the CPU (holding the power button in will allow this to be checked). I can see no CPU activity though. The 14.745MHz clock is present.
Any common issues with these units? I have schematics.
I've confirmed the PSU outputs are ok, as are the 3v3 and 1v8 supplies to the CPU (holding the power button in will allow this to be checked). I can see no CPU activity though. The 14.745MHz clock is present.
Any common issues with these units? I have schematics.