Announcement

Collapse
No announcement yet.

PV Session 400

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Thank you Bill.
    22 ohm, not 22K, sorry.
    I will lift one side when I replace the open cap.

    I appreciate the additional info on measuring B-E voltage. Between you guys, I am getting a better understanding. I will also test across the legs as Enzo suggested.

    Soon as I get a second, I will test the Xstrs correctly. It may be tomorrow evening before I get a chance.

    Thank you.

    Justin

    Comment


    • #17
      Thanks Enzo.
      I figured the value was ok, I just need to know if the non polarized film cap I have on hand is ok to substitute the open electrolytic.

      The 22 ohm resistor that measured "closed" is the one that hooks to one leg of the open cap. I will pull one end and test it as well as give the driver another look.

      I will update soon as I make more progress.

      Thanks.

      Comment


      • #18
        Would someone be so kind as to repost the schematic from the first post? Seems to be a dead link. If not, I will call Peavey on Monday and post it here.

        Comment


        • #19
          Here you go: Session 400_LTD.zip

          Comment


          • #20
            Thank you!

            Comment

            Working...
            X