Just so we are all on the same page:
(" it seems that resistor is in a good spot to be a fuse of sorts before the OT")
The rectifier output feeds the OT center tap directly.
Off of that, you have a 1K / 2W resistor which feeds the 6V6 screens.
From there we go to a 10K/ 1 W resistor which feeds the preamp.
(" it seems that resistor is in a good spot to be a fuse of sorts before the OT")
The rectifier output feeds the OT center tap directly.
Off of that, you have a 1K / 2W resistor which feeds the 6V6 screens.
From there we go to a 10K/ 1 W resistor which feeds the preamp.
Comment