Announcement

Collapse
No announcement yet.

strat harness wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • strat harness wiring

    Click image for larger version

Name:	strat harness.jpg
Views:	1
Size:	427.4 KB
ID:	871200
    looking for help in wiring schematic for this strat harness with small transformer mounted on 500k tone pot. other tone pot 250 K --with a push/pull volume pot. Using suhr v60 lp pickups in s-s-s configuration. Any help much appreciated!! Hoping pic will show!Click image for larger version

Name:	strat harness.jpg
Views:	1
Size:	427.4 KB
ID:	871200



    if anyone has any wiring diagrams for sss strat with push /pull volume --I would appreciate info
    Last edited by trashcole; 01-12-2017, 10:46 PM. Reason: more info

  • #2
    My best guess is the transformer winding is being used as an inductor, probably in a bass-cut control. Sort of rare in the modern day, but Gibson had bass cut switches in some 70's-80's guitars. And Guild's Starfire basses, a bass cut switch there as well. What's old is new again.

    FWIW it is handy when using deep overdrive & many fuzz circuits, to cut bass from the instrument otherwise the tone turns to mush.
    This isn't the future I signed up for.

    Comment

    Working...
    X