Announcement

Collapse
No announcement yet.

Transistor question,\

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Transistor question,\

    I was reading on this site(Troubleshooting & Repair Guide)
    Section 5.1
    In the most general of terms, with any bipolar transistor (FETs and MOSFETs are completely different!), there should be about 600-700mV measured between the emitter and base

    Am I right in understanding one probe on emitter and one probe on base?

    Than
    soldering stuff that's broken, breaking stuff that works, Yeah!

  • #2
    Yes, basically the same as a diode junction. Polarity will depend on if the transistor is a PNP or NPN. Same thing from base to collector. Collector to emitter will read as open.
    "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

    Comment

    Working...
    X