Announcement

Collapse
No announcement yet.

Univox U-1011 replacement reverb tank

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Univox U-1011 replacement reverb tank

    Hey there, I acquired a 71 Univox U-1011 without the head cabinet, thus no reverb tank. Was wondering if anyone had one and could let me know the code on the tank, can't seem to find any documentation on it. Thank you!

  • #2
    How about a schematic for the unit, that will tell us what it needs.
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #3
      Click image for larger version

Name:	u1011-2.gif
Views:	5
Size:	144.5 KB
ID:	849175
      "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

      Comment


      • #4
        thank you, my noobs are showing, but, I tried to research this on my own, but as usual nothing is simple. I don't know how to tell what reverb tank I would need from this schematic. I see the reverb circuit, but I don't know how to determine which tank is used. Also, just FYI, this U-1011 is just about the most uninspiring sounding thing I've ever played through. Still wouldn't mind getting the reverb to work though, thank you for your help!

        Comment


        • #5
          It's a cap coupled drive, so right away I think of similar arrangements in older Ampeg and Traynor circuits.
          They generally use 4FB type tanks.
          Originally posted by Enzo
          I have a sign in my shop that says, "Never think up reasons not to check something."


          Comment


          • #6
            thanks very much!

            Comment

            Working...
            X