Results 1 to 3 of 3

Thread: Active resonant HP & LP filter PCB for Strat

  1. #1
    New Member
    Join Date
    Jun 2013
    Posts
    2
    Thumbs Up/Down
    Received: 0/0
    Given: 1/0

    Active resonant HP & LP filter PCB for Strat

    Hi There,

    Posts on this seem incomplete/unresolved or I didn't understand them, so sorry if this is easy/obvious.

    GOAL
    I'd like to implement into a Strat:
    • 2x Active resonant Bandpass filters
    • 2x Concentric pots to control frequency and Q
    • 2x DPDT switches to activate the filters independently
    • Be small and super-simple so it will fit into a Strat using a 9v (will route more room)


    EXAMPLE
    https://www.electronics-tutorials.ws.../filter_7.html

    Click image for larger version. 

Name:	fil33.gif 
Views:	7 
Size:	9.6 KB 
ID:	49622

    I found this schematic but am unclear how to integrate it into a guitar becase as I understand things, the guitar stuff (pickups, volume, tone pots) are before the output jack:
    • Does the circuit require modification to integrate into a guitar?
    • How does the 9v power integrate into the circuit?


    EXPERIENCE
    While I've made pedal kits and wired parallel/series/out-of-pase wiring in a Strat, I know little about schematics and nothing electronics design.
    Also, is DesignSpark PCB good for translating schematics into PCBs (never done that before)?

    Any help or pointers would be much very appreciated (go easy, I'm super green when it comes to electronics!)

    Cheers

    Ben

    0 Not allowed! Not allowed!
    Last edited by cmscss; 07-05-2018 at 07:55 PM.

  2. #2
    Supporting Member Steve A.'s Avatar
    Join Date
    May 2006
    Posts
    4,447
    Thumbs Up/Down
    Received: 69/0
    Given: 56/0
    I keep looking at the $249 Empress Parametric EQ as they are great for sculpting the sound of your guitar, or the BYOC kit for half that price. However trying to fit a good portion of that circuitry into a strat would be quite a challenge.

    https://empresseffects.com/products/paraeq

    https://buildyourownclone.com/products/paraeq

    Is there a particular reason that you want it installed onboard? I imagine that there are custom guitar makers who would build such a guitar for $2K-$3K.

    If you wanted to build something yourself you might start with the BYOC kit and then replace the pots you did not need with fixed resistors or trimpots (for internal adjustments) and then etch your own custom PCB.

    As for powering such a device I would use an external battery box connected to the guitar via a stereo cable since the batteries would need to be changed quite often.

    Dual concentric pots for guitars are usually available in just a few resistances like 250K. For other values you might check electronic suppliers like Mouser. Be sure to get all of the specs so that you can find the appropriate sized knobs.

    Or you could wait a few years for some company to come out with a digital pedal controlled by bluetooth from an LCD screen embedded in a strat pickguard that could do all of that and so much more... it could happen.

    Steve A. (one of the moderators)

    P.S. I can move this thread to the Guitar Effects subforum if you want as those guys know a lot more about electronics than guitar techs.

    2 Not allowed! Not allowed!

  3. #3
    New Member
    Join Date
    Jun 2013
    Posts
    2
    Thumbs Up/Down
    Received: 0/0
    Given: 1/0
    Thanks heaps for the reply Steve, I'll checkout your links (I've built a few BYOC kits).

    I also found these: https://www.guitarfetish.com/Onboard...Kit_p_573.html

    So based on your reply, an off-the-shelf option would be the path of least resistance.

    If you could move the thread to the Guitar Effects subforum, that would be great (sorry for the confusion).

    Cheers

    0 Not allowed! Not allowed!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 7
    Last Post: 07-11-2017, 10:54 PM
  2. Replies: 2
    Last Post: 07-21-2013, 03:49 AM
  3. Circuit Advice On Strat Active Device
    By tube power in forum Guitar Tech
    Replies: 11
    Last Post: 01-27-2011, 01:56 PM
  4. EMG active in a strat with passive pickups?
    By Switchstrong in forum Guitar Tech
    Replies: 1
    Last Post: 12-13-2009, 04:42 PM
  5. Replies: 13
    Last Post: 10-16-2007, 02:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •