|
09-08-2009, 06:10 PM
| #1 |
| Junior Member Join Date: Sep 2009
Posts: 2
| PPIMV Problem
I have a modded silverfaced twin reverb that I have installed a Ken Fisher PPIMV with 250k dual-ganged pot w/ 2.2m resistors. I have almost no sound coming out. I've checked everything from making sure I removed the 2 220k resistors and solder joints. Everything looks correct but I'm kind of a novice at this and am not sure what I should reading on the grid etc. Any help would be greatly appreciated. Thanks.
|
|  |
| ...and now, a word from our sponsor: |
| |
|
09-08-2009, 10:47 PM
| #2 |
| Site Janitor  |
I know you've checked your wiring, but sometimes it takes a while to see something that's staring you in the face. If you wired it exactly like the diagram, then it has to work - it has no choice. If it doesn't work as it should, then it's not really wired like the diagram. You need to find what's different between the diagram and the way you actually wired it.
__________________ -tb |
|
| |
| The Following User Says Thank You to tboy For This Useful Post: | erikpaul (09-09-2009) |
|
09-09-2009, 12:13 AM
| #3 |
| Senior Member Join Date: May 2006 Location: Lansing, Michigan, USA
Posts: 10,366
|
Or those 2.2M resistors are really 2.2 ohm resistors, or something.
__________________ Education is what you're left with after you have forgotten what you have learned. |
|
| |
| The Following User Says Thank You to Enzo For This Useful Post: | erikpaul (09-09-2009) |
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Non-Marshall PPIMV | EFK | Mods & Tweeks | 26 | 09-09-2009 06:16 AM |
| PPIMV Silverface Twin | shiner555 | Mods & Tweeks | 3 | 01-26-2009 06:22 PM |
| NFB / PPIMV question | Fred G. | Mods & Tweeks | 9 | 03-23-2008 12:04 PM |
| big long question re PPIMV and NFB | Fred G. | Guitar Amps | 2 | 10-20-2006 02:16 PM |
Linear Mode
