|
11-06-2009, 10:16 AM
| #1 |
| Junior Member Join Date: Aug 2009
Posts: 2
| Mxr Dynacomp
Hi! I recently got an old pcb from a MXR Dynacomp pedal. Now im facing the delicate problem of putting it together with new pots, jacks and housing. Problem is that the pics im so long collected dont give it all away, and reading schematics only confuses me.  Is there anyone with pics from the inside of an old dynacomp that shows how the wiring should go? Thanks beforehand!! |
|  |
| ...and now, a word from our sponsor: |
| |
|
11-06-2009, 02:02 PM
| #2 |
| Member Join Date: Jun 2006
Posts: 22
| |
|
| |
|
11-10-2009, 12:01 AM
| #3 |
| Senior Member Join Date: Jun 2007
Posts: 1,125
|
Try these photos. The pot on the top of photo is the output control the lower one is the sensitivity control. The jack at the top of the photo is the output jack the lower one is the input. The input tip connection goes to the switch and to the middle top connection of the pc board. Let me know if you need anything more explained. |
|
| |
|
11-12-2009, 10:41 PM
| #4 |
| Junior Member Join Date: Aug 2009
Posts: 2
|
Thanks for the help!! Those pics were very clear and easy to follow. Now i feel very confident and looking forward to get the parts and put it togheter..  Once again ...Many, many thanks.. |
|
| |
 |
| Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| MXR dynacomp 3pdt led mod? | Mrwizard | Guitar Effects | 4 | 10-27-2009 07:22 PM |
| Hum from DC supply on MXR DynaComp? | Mikhael | Guitar Effects | 14 | 04-24-2009 04:14 AM |
| MXR dynacomp (script) 1975 schematics | mathologie | Guitar Effects | 6 | 12-03-2008 04:35 PM |
| mxr m102 dynacomp revision F.2 Schematics | darthpoodle | Guitar Effects | 1 | 08-11-2008 04:24 PM |
| inside MXR dynacomp!!!??? | Jay | Guitar Effects | 5 | 06-08-2006 11:08 PM |
Linear Mode
