Page 2 of 5 FirstFirst 12345 LastLast
Results 36 to 70 of 166

Thread: Pickup Gaussmeter v.3.0

  1. #36
    Senior Member
    Join Date
    Nov 2007
    Location
    Salt Lake City
    Posts
    200
    Elepro,
    Me too Please!
    Thanks!
    Cru

  2. #37
    Woodgrinder/Pickupwinder copperheadroads's Avatar
    Join Date
    Jun 2009
    Location
    Iceburg Alley ,Newfoundland,CAN
    Posts
    2,024
    Quote Originally Posted by David King View Post
    That leaves only three.

    I multiplied the mouser order out by 11 and it comes to $191, no big savings there except on shipping which is hardly a consideration compared to sorting out all the parts and mailing off a dozen packages. I would consider having Elepro send all US-bound boards to one address via the most secure way we can afford and redistributing them from within this continent. It might make sense to split Canadian orders off from the US ones just to save the 2 weeks per border crossing.
    anybody else from canada in on this

  3. #38
    Pickup Maker David Schwab's Avatar
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    10,927
    I don't want all the parts yet, just the PCB + MCU. I probably have a lot of the parts already, and I'm not in a rush to build it, since I have the previous meter.
    It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. Albert Einstein


    http://coneyislandguitars.com
    www.soundcloud.com/davidravenmoon

  4. #39
    Supporting Member
    Join Date
    May 2006
    Location
    PDX
    Posts
    3,186
    A set of dimensions for the PC board(s) would be allow us to choose a suitable project box. It looks like it might still fit in the enclosure some folks got for the last GMeter project? My version 1 is still sitting in the buff -I use it everyday that way.

  5. #40
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    here a pdf of the pcb in real dimensions.... print at 100%

    bye
    Attached Files Attached Files

  6. #41
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    Quote Originally Posted by CRU JONES View Post
    Elepro,
    Me too Please!
    Thanks!
    Cru
    sorry but all the PCBs are sold.... i will order again in a few days... and i could have in a week...

    bye

  7. #42
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    Ok, David have you picked out a box to house it now that you have the PCB size.

  8. #43
    Supporting Member StarryNight's Avatar
    Join Date
    Oct 2008
    Location
    Victoria, BC Canada
    Posts
    400
    Quote Originally Posted by copperheadroads View Post
    anybody else from canada in on this
    I'm seriously considering it. have the 11 been accounted for? I guess these sensors will not be calibrated like V.1.

  9. #44
    Supporting Member
    Join Date
    May 2006
    Location
    PDX
    Posts
    3,186
    Those of us with V1 should be able to calibrate the new sensor or just use our old probes.

    My printer can't do anything right -it's an HP I have no idea what the pcb dims are.

  10. #45
    Pickup Maker David Schwab's Avatar
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    10,927
    Quote Originally Posted by David King View Post
    Those of us with V1 should be able to calibrate the new sensor or just use our old probes.
    I was also thinking of using V1 to calibrate the new version.

    My printer can't do anything right -it's an HP I have no idea what the pcb dims are.
    3.28" X 3"

    I used the measure tool in Acrobat.
    It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. Albert Einstein


    http://coneyislandguitars.com
    www.soundcloud.com/davidravenmoon

  11. #46
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    some user have to confirm and pay yet....

    not hurry but i would like to go at post office just one time for all the shipping...
    please let me know if someone left the group buy or it's just a delay....

    thanks bye

  12. #47
    Member
    Join Date
    Aug 2009
    Posts
    83

    Elepro

    I may be interested, what is the final cost going to be?

    Bill

  13. #48
    Member
    Join Date
    Aug 2009
    Posts
    83

    Pricing

    Never mind, read through the thread and found the info I needed.

    Bill

  14. #49
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    one user left... so the first excluded from group was CRU JONES... i sent a message to him...

  15. #50
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    Bill Scheltema I hope you get one.

  16. #51
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    a picture of all PICs programmed and tested (mounting them in the gaussmeter) and ready to ship....


    Quote Originally Posted by Bill Scheltema View Post
    I may be interested....

    Bill
    Bill, CRU JONES confirmed and paid... so all pcb & pics would have to be sold but two user did not confirm and pay yet... if someone else left i will say you...
    Attached Thumbnails Attached Thumbnails test.jpg  

  17. #52
    Supporting Member
    Join Date
    May 2006
    Location
    PDX
    Posts
    3,186
    There are a couple of ABS enclosures that might work. The dims on Mouser don't specify inside or outside so that's a bit frustrating. There are a few that are close but 2.9" instead of 3" so we may have to resorts to belt-sanding off some width from the PCB. Let's not forget we need to drop a 9V in there as well. I like things to be compact as possible so I'm going to let someone else take over suggesting a box that's sure to fit. Radio shack might just be the best bet for most of us.

    I'll probably just rout mine out a block of wood, it goes very quickly on the milling machine.

    Elepro, I really like your implementation with the USB port. Brilliant!

  18. #53
    Supporting Member belwar's Avatar
    Join Date
    Jul 2008
    Posts
    1,066
    How do I pay, and who do I send payment two? I asked for 3, but if someone else needs one I can do with just two.. PM me?

  19. #54
    Pickup Maker David Schwab's Avatar
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    10,927
    Quote Originally Posted by David King View Post
    There are a couple of ABS enclosures that might work. The dims on Mouser don't specify inside or outside so that's a bit frustrating. There are a few that are close but 2.9" instead of 3" so we may have to resorts to belt-sanding off some width from the PCB. Let's not forget we need to drop a 9V in there as well. I like things to be compact as possible so I'm going to let someone else take over suggesting a box that's sure to fit. Radio shack might just be the best bet for most of us.
    The case I used for the last one should work. It's 3.25 X 5.62 AND has a 9v battery compartment with snap off door.

    I don't recall the inside dimensions, but here's the specs for the box.
    Attached Thumbnails Attached Thumbnails finished_meter.jpg  
    Attached Files Attached Files
    It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. Albert Einstein


    http://coneyislandguitars.com
    www.soundcloud.com/davidravenmoon

  20. #55
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    where did you purchase this enclosure at David Schwab.

  21. #56
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    Belwar, you lost some post.... you have to send me a pm with your email paypal account and i will send you a paypal payment request....
    but now i don't know if you want 3 or 2 (so you leave one at Bill....)

    let me know
    bye
    Last edited by -Elepro-; 06-05-2010 at 10:25 PM.

  22. #57
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    Looks like he was going to leave one for Bill. I placed my order with mouser, Here is the Mouser part number ( 563-PBS-11327-B )for the box that David Schwab referenced above.
    Last edited by BadHorsie; 06-05-2010 at 11:13 PM.

  23. #58
    Supporting Member belwar's Avatar
    Join Date
    Jul 2008
    Posts
    1,066
    Quote Originally Posted by -Elepro- View Post
    Belwar, you lost some post.... you have to send me a pm with your email paypal account and i will send you a paypal payment request....
    but now i don't know if you want 3 or 2 (so you leave one at Bill....)

    let me know
    bye
    PM sent. I'll take only two units so that the other gentleman can get one.

    Matthew

  24. #59
    Senior Member mkat's Avatar
    Join Date
    May 2006
    Location
    /usr/bin
    Posts
    265
    Quote Originally Posted by -Elepro- View Post
    some user have to confirm and pay yet....

    not hurry but i would like to go at post office just one time for all the shipping...
    please let me know if someone left the group buy or it's just a delay....

    thanks bye
    Done.
    int main(void) {return 0;} /* no bugs, lean, portable & scalable... */
    www.ozbassforum.com

  25. #60
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    Bill Scheltema, i tried to send you a PM but you have chosen not to allow it in your user control panel....
    please let us know if you are interested so Belwar can choose if buy 2 or 3.....

    thanks
    bye

  26. #61
    Member
    Join Date
    Aug 2009
    Posts
    83

    Elepro

    Hi there,

    Not sure why you can't get through. I went through my setup and all is checked for allowed as far as email PM's are concerned.
    You can try again.

    Bill
    Last edited by Bill Scheltema; 06-06-2010 at 10:11 PM.

  27. #62
    Member
    Join Date
    Aug 2009
    Posts
    83

    Elepro

    Just got the payment request and sent it off. Thanks.

    Bill

  28. #63
    Supporting Member belwar's Avatar
    Join Date
    Jul 2008
    Posts
    1,066
    payment sent and THANK YOU.

  29. #64
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    thanks at all...
    i will ship tomorrow....

    bye

  30. #65
    Pickup Maker David Schwab's Avatar
    Join Date
    May 2006
    Location
    Staten Island, NY
    Posts
    10,927
    Quote Originally Posted by BadHorsie View Post
    I placed my order with mouser, Here is the Mouser part number ( 563-PBS-11327-B )for the box that David Schwab referenced above.
    Yes, I got it from Mouser:

    PBS-11327-B Bud Industries Enclosures, Boxes, & Cases
    It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. Albert Einstein


    http://coneyislandguitars.com
    www.soundcloud.com/davidravenmoon

  31. #66
    Senior Member -Elepro-'s Avatar
    Join Date
    Apr 2009
    Posts
    434
    all shipped....

    bye

  32. #67
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    my box from Mouser Electronics just showed up. I am ready roll once the board gets here.

  33. #68
    Woodgrinder/Pickupwinder copperheadroads's Avatar
    Join Date
    Jun 2009
    Location
    Iceburg Alley ,Newfoundland,CAN
    Posts
    2,024
    what about the mouser order . do we have to that our selves ?

  34. #69
    Supporting Member
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    40
    Quote Originally Posted by copperheadroads View Post
    what about the mouser order . do we have to that our selves ?
    Yes, you can order it at your own leisure. I ordered mine as soon as I was sure I was getting a PCB from -Elepro-

  35. #70
    Supporting Member
    Join Date
    May 2006
    Location
    PDX
    Posts
    3,186
    My new PCB and pic arrived today. Thanks Mr Elepro!

Page 2 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gaussmeter project
    By -Elepro- in forum Pickup Makers
    Replies: 64
    Last Post: 12-23-2010, 11:48 PM
  2. Handheld gaussmeter
    By sunburst kid in forum Tools and Coil Winding Gear
    Replies: 2
    Last Post: 03-03-2010, 05:37 PM
  3. Ideal Gaussmeter Readings
    By tonedeciple in forum Pickup Makers
    Replies: 16
    Last Post: 02-19-2010, 12:40 AM
  4. Yet Another Gaussmeter
    By salvarsan in forum Pickup Makers
    Replies: 64
    Last Post: 01-26-2010, 09:23 PM
  5. Gaussmeter for sale
    By -Elepro- in forum Pickup Makers
    Replies: 15
    Last Post: 10-17-2009, 04:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •