Holes in Tele baseplates

[foonting]

Could any of you guys tell me what tap to use in a telecaster bridge baseplate so that it'll take a standard screw? I has a suspicion it was 4BA but that somehow doesn't look right ... Help!

[big_teee]

6x32 Tap.
Mojo Screws » Pickup Mounting Screws for Strat (6-32 x 3/4'' Roundhead Phillips Stainless Steel) / 8
T

[foonting]

6x32 Tap.
Mojo Screws » Pickup Mounting Screws for Strat (6-32 x 3/4'' Roundhead Phillips Stainless Steel) / 8
T

Thanks ... that sorts out the size ... sadly being in the UK, UNC screws are as rare as rocking horse droppings. Still I can tap the holes that's something!

[big_teee]

Thanks ... that sorts out the size ... sadly being in the UK, UNC screws are as rare as rocking horse droppings. Still I can tap the holes that's something!

Nominal 6x32 screw.
.1312 inch = 3.33248 millimeters
M3.5 × 0.6|6g|3.479mm|3.354mm|
Standard External Metric Thread and Fastener Sizes M1.6 - M18 - Engineers Edge
Good Luck,
Terry

[foonting]

Nominal 6x32 screw.
.1312 inch = 3.33248 millimeters
M3.5 × 0.6|6g|3.479mm|3.354mm|
Standard External Metric Thread and Fastener Sizes M1.6 - M18 - Engineers Edge
Good Luck,
Terry

Yay you speeka my language .... sorted!