Faceplates

496dart · 07-16-2006, 09:45 PM

could you guys give me a link or 2 to someone that does custom amp faceplates ? I had some done in the past by a guy in Washington ? I cant remember who it was !!

Ray Ivers · 07-16-2006, 11:33 PM

Right now I'm communicating with Joe Vallina at Amplates (http://amplates.com) - I sent him a .bmp of my front and rear panels, he got right back to me with a .pdf of the front to look over, and is still working on the back. The material options look good, and the sample prices seem quite reasonable (I haven't gotten a quote for mine yet, though).

Ray

Joe6v6 · 07-16-2006, 11:38 PM

Ive used these guys several times & have been very happy with the product and the user friendly software. They are in Seattle so it may be the same company that you have used in the past.
http://www.frontpanelexpress.com/

JOE

496dart · 07-17-2006, 03:56 AM

i think that was the place joe. I couldnt quite get my plates right so i sent templates back and forth and they did a great job.

496dart · 07-20-2006, 07:46 PM

hmmm any other sources guys ?

amplates is extremely expensive

front panel express wants $80 an hour + panelcost just to correct a couple holes on my design--i even have an exact template done !!

steve · 07-20-2006, 09:10 PM

Quote:

Originally Posted by 496dart

hmmm any other sources guys ?

amplates is extremely expensive

front panel express wants $80 an hour + panelcost just to correct a couple holes on my design--i even have an exact template done !!

Try Jeannie at BNP Lasers:

http://www.bnplasers.com/

steve

nico.verduin · 07-20-2006, 09:19 PM

Quote:

Originally Posted by steve

Try Jeannie at BNP Lasers:

http://www.bnplasers.com/

steve

I second that. Excellent service!!

famp69wv@yahoo.com · 07-20-2006, 10:03 PM

Count me in too because I think BNP is a great supplier! This is the notification Email on her vacation;

"To: OUR VALUED CUSTOMERS
From: BNP Lasers
We will be closed for vacation again this summer from July 26th through August 18th.

We know how hard it is to plan this far in advance, but if you expect to place an order for custom engraved products during this time frame, please get it to us no later than July 14th so that we have time to produce and ship your order before we close.

Thank you for your continued business and we hope this does not cause a major inconvenience.
Jeanne & Mike Kangas

BNP Lasers
www.bnplasers.com
724-222-5446
MORE THAN JUST SMOKE & MIRRORS..!"

496dart · 07-21-2006, 04:01 AM

thanks--ill try them

07-16-2006, 09:45 PM	#1
496dart Senior Member Join Date: Jun 2006 Location: iowa Posts: 122	Faceplates could you guys give me a link or 2 to someone that does custom amp faceplates ? I had some done in the past by a guy in Washington ? I cant remember who it was !!

07-16-2006, 11:38 PM	#3
Joe6v6 Junior Member Join Date: Jun 2006 Location: West Palm Beac FL Posts: 17	Ive used these guys several times & have been very happy with the product and the user friendly software. They are in Seattle so it may be the same company that you have used in the past. http://www.frontpanelexpress.com/ JOE __________________ Resistors not Transistors !

07-20-2006, 10:03 PM	#8
famp69wv@yahoo.com Member Join Date: May 2006 Posts: 27	Jeanne's on vacation for the next several weeks Count me in too because I think BNP is a great supplier! This is the notification Email on her vacation; "To: OUR VALUED CUSTOMERS From: BNP Lasers We will be closed for vacation again this summer from July 26th through August 18th. We know how hard it is to plan this far in advance, but if you expect to place an order for custom engraved products during this time frame, please get it to us no later than July 14th so that we have time to produce and ship your order before we close. Thank you for your continued business and we hope this does not cause a major inconvenience. Jeanne & Mike Kangas BNP Lasers www.bnplasers.com 724-222-5446 MORE THAN JUST SMOKE & MIRRORS..!" __________________ Philip Morrison

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2006, 11:33 PM	#2
Ray Ivers Lifetime Member Join Date: Jun 2006 Location: Connecticut Posts: 442	Right now I'm communicating with Joe Vallina at Amplates (http://amplates.com) - I sent him a .bmp of my front and rear panels, he got right back to me with a .pdf of the front to look over, and is still working on the back. The material options look good, and the sample prices seem quite reasonable (I haven't gotten a quote for mine yet, though). Ray

07-17-2006, 03:56 AM	#4
496dart Senior Member Join Date: Jun 2006 Location: iowa Posts: 122	i think that was the place joe. I couldnt quite get my plates right so i sent templates back and forth and they did a great job.

07-20-2006, 07:46 PM	#5
496dart Senior Member Join Date: Jun 2006 Location: iowa Posts: 122	hmmm any other sources guys ? amplates is extremely expensive front panel express wants $80 an hour + panelcost just to correct a couple holes on my design--i even have an exact template done !!

07-21-2006, 04:01 AM	#9
496dart Senior Member Join Date: Jun 2006 Location: iowa Posts: 122	thanks--ill try them

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)