Peavey Classic VTX problem
I have a problem with my peavey classic vtx 212. I was googling stuff about the amp and i found multiple threads on this forum about problems with it, so I thought this would be a good place to ask. So my amp sounds bad. When you play there is no sustain and the sound is very low and fuzzy. One of the capacitors looked like one of the leads had broke and the previous owner fixed it with wire so i replaced it. I thought the tube sockets may have been bad because the amp is about thirty years old. Replacing the sockets did nothing. I don't really know what to do. When i plug into the power amp in it sounds the same, but if i plug into the normal input then plug a cord into the pre amp out and into another amp it sounds fine. So i think the problem is in the power section. Any ideas?
soundcloud.com/dylanmn/straight-in this is what is sounds like. I made this recording awhile ago for a thread on another site but i didn't get much help.