Results 1 to 1 of 1

Thread: Making your own fret tang nippers revisited...

  1. #1
    Supporting Member Steve A.'s Avatar
    Join Date
    May 2006
    Posts
    3,820

    Making your own fret tang nippers revisited...

    I've mentioned making your own fret tang cutters before but the $40+ Klein hand nibbler was discontinued several years ago and no longer shows up on eBay. (You might check at your local sheet metal and HVAC shops to see if they have a used nibbler to sell because practically everyone has switched to electric or pneumatic nibblers. They still come in handy if you need to cut a hole in a metal duct in an attic or crawl space without dragging in power tools and extension cords.)

    This following video shows how to make a tang cutter with a "$3 tool from Harbor Freight." Good luck finding one as HFT discontinued them several years ago.




    Watch "Luthier's Tips & Tricks # 22, Making your own fret tang nippers" on YouTube

    I found one on Amazon a few years ago for about $12 including shipping and it was my original prototype. It wasn't as powerful as the Klein nibbler and if the bumps on the fret tang were lined up just so it would not cut through (no problem- just move the nibbler back a little and do 2 cuts.)

    I just now checked on-line and Jameco sells them on eBay for $9.99 plus $4 s/h.

    https://www.ebay.com/i/110793684682

    Minimum shipping charge on their website is $5.99 but you might want to check their clearance section for capacitors and resistors (they buy up surplus parts from many of the mfgs in Silicon Valley.)

    https://www.jameco.com/z/HT-204-R-Ha...tal_18810.html

    Here's their listing of capacitors on clearance. While single lot prices are high, 10 lots and 100 lots are quite reasonable (these parts are usually already packaged in bags of 10 or 100 so you pay extra for them to open them up.)

    https://www.jameco.com/shop/StoreCat...SEARCH%252BNAV

    Steve A.

    EDIT... Make a liar out of me- I see that a new Klein nibbler just sold on eBay for around $41.
    Last edited by Steve A.; 09-30-2017 at 10:32 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Klein nibble tool for fret tang cutter on eBay
    By Steve A. in forum Guitar Tech
    Replies: 9
    Last Post: 05-23-2017, 08:03 AM
  2. Passive Midrange revisited
    By Natman in forum Guitar Tech
    Replies: 9
    Last Post: 08-09-2016, 01:59 PM
  3. Taller humbucker bobbins revisited!
    By jimboyogi in forum Beginner/ Hobbyist
    Replies: 7
    Last Post: 08-10-2014, 12:57 AM
  4. Bassman AB165 To AA864 Revisited
    By Amp Kat in forum Mods & Tweaks
    Replies: 5
    Last Post: 06-28-2012, 06:31 AM
  5. Behringer PMH1000 revisited
    By drewl in forum Maintenance, Troubleshooting & Repair
    Replies: 3
    Last Post: 12-07-2011, 01:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •