I am re-capping some of my Ampeg Gemini I and find that the .047's on the 12AX7 in the Tremolo circuit are out of tolerance. It has been very many years since my limited studies in this field and I don't remember just what they do.
My question is, must they be replaced with polarized caps as are there now, or can I use the tubulars that I got from Fliptops? I apologize for the lack of detail, I'm kinda hoping for someone who is familiar with the circuit.
Thanks!
bearpal
P.S.
these caps are from; pin 1 of V7a (plate) before 120k to ground, and from pin2 of V7a (grid) before and after speed pot.
Thanks again!
bearpal
My question is, must they be replaced with polarized caps as are there now, or can I use the tubulars that I got from Fliptops? I apologize for the lack of detail, I'm kinda hoping for someone who is familiar with the circuit.
Thanks!
bearpal
P.S.
these caps are from; pin 1 of V7a (plate) before 120k to ground, and from pin2 of V7a (grid) before and after speed pot.
Thanks again!
bearpal
Comment