Tweet
I don't remember these being so crappy, looks like a Valvestate inside.
I think the later ones were changed a bit, but anyway...
I guess you have to unsolder the output tube wires to remove the output board?
Something intermittant in the fx loop, and that side of the board isn't properly supported and flexes like crazy so I'm sure there's some intermittant pc board connections.
I think the later ones were changed a bit, but anyway...
I guess you have to unsolder the output tube wires to remove the output board?
Something intermittant in the fx loop, and that side of the board isn't properly supported and flexes like crazy so I'm sure there's some intermittant pc board connections.