Thanks everyone for the info.
I was able to fix it this morning.
Long story short, visual and all tubes were lit. couldn't hear RL2 engaging.
FIX: Adding a ground from control board to transformer screw (grounds on posts look iffy)and Swapped around preamp tubes.
now I can hear RL2 engage.
Damn this thing sounds great.
Thanks again to all that replyed
I was able to fix it this morning.
Long story short, visual and all tubes were lit. couldn't hear RL2 engaging.
FIX: Adding a ground from control board to transformer screw (grounds on posts look iffy)and Swapped around preamp tubes.
now I can hear RL2 engage.
Damn this thing sounds great.
Thanks again to all that replyed
Comment