Super Champ XD Red light on. Channel select light off. No Sound.

[PowerToTheTubes]

Thanks oc disorder. Are Pico Fuses a common thing that electrical hobby shops should carry them? I live in Prague so it's hard to communicate with the folks here. So I can't really call. I have to show up with a picture and specs.

[oc disorder]

Unfortunately no. Specialist repair shops for some business equipment ,TV's may sell you one if they have plenty but I fear the language barrier
would make that too difficult. I'll just have a look in some European on line places.. trouble is they are so cheap you may have to buy something else !!

here's a start
RS Components Sp. z o.o.
ul. Puławska 303
02-785 Varšava / Polsko
Well its only 7 hours away.. think they are on line only.
http://cz.rs-online.com/web/p/nerese...dicem/5413287/

Here's my Auzzi version UK may be best for you

http://au.rs-online.com/web/p/non-re...fuses/5413287/

I 'spose these days you can walk into a shop and show them their stock you want to buy on your phone

[PowerToTheTubes]

Wow Thanks oc disorder! I already ordered these Fuse axial 125V PICO F 2A - koupit levn? u Mercateo

I hope it's correct!

thanks so much for everyone's help! I appreciate it. I will update this thread once it arrives. Says it gets here on Friday.

Let's say if I want to give it a go and try to do this myself... I shouldn't right? It's not easy...?

[52 Bill]

Let's say if I want to give it a go and try to do this myself... I shouldn't right? It's not easy...?

Removing the board will not be an easy job, but the fuse looks like it is soldered into a plated through hole, meaning that if you have the correct desoldering tool, you could remove the fuse from the top of the board and resolder the new one in from the top of the board.

How strong are your soldering skills?

[PowerToTheTubes]

Well to be honest, I haven't soldered in about 10 years... I am totally a DIY kind of guy but I really love this amp and I don't want to screw it up.

[PowerToTheTubes]

I finally received my pico fuse after a month of waiting... I'm going to get someone who knows what they're doing to install this for me. I will update once it's attached and let you guys know the outcome.

[PowerToTheTubes]

I did it!!!

I decided to go ahead and just do it myself. My solder points are terrible to be honest... I was amazed when I plugged it in that it worked!!! I'm so happy! Thanks for everyone's help! I couldn't have done it without any of you. Thanks again!