Tweet
Hello folks!
I have a Digitech RDS 2001 I picked up pretty cheap a good while back. However, the repeat hold/sampling/trigger functions have never worked. The repeat hold LED will switch on and off and the trigger will initially light the LED and then seemingly get stuck in that state. Neither of these things seem to actually affect the sound coming out. Switching to the trigger or sample mode mutes the delayed sound entirely. Using switches in the external foot switch jacks does not remedy the situation. I've attached the schematic (which was kind of a bear to track down - I hope it helps others). If anyone has any suggestions of where to start troubleshooting I'd greatly appreciate it!
digitechrds.pdf
Thanks!
Chris
I have a Digitech RDS 2001 I picked up pretty cheap a good while back. However, the repeat hold/sampling/trigger functions have never worked. The repeat hold LED will switch on and off and the trigger will initially light the LED and then seemingly get stuck in that state. Neither of these things seem to actually affect the sound coming out. Switching to the trigger or sample mode mutes the delayed sound entirely. Using switches in the external foot switch jacks does not remedy the situation. I've attached the schematic (which was kind of a bear to track down - I hope it helps others). If anyone has any suggestions of where to start troubleshooting I'd greatly appreciate it!
digitechrds.pdf
Thanks!
Chris