Hot rod deluxe RevA channel switching

[g1]

If your meter won't register 1Khz, try 100 or 200 hz.

[Oldmactech]

according to the description my multimeter (Craftsman 82082) has a signal generator. Scoured the net for a “how to” but nothing.
clueless.

[g1]

Even if it did, you will not be able to use it for sig. gen. and measure voltage at the same time. And you need to do that.

[Oldmactech]

Oil, I get that. So I downloaded an app, will send the signal to input 1 via a 1/8” to 1/4” splitter. Is the 4mV measurement a function of pot volume?

[g1]

The 4mV should be at the input jack. So you will have to adjust the output level of the app device. The amp pots should all be set at 50% as stated in the notes on the schematic.