I have CL Heritage on my workbench right now, I'm rewiring it from 115V to 240V
Nic to see that the boards are thicker and everything is just better done that the regular ones made far East. This is the first Heritage I work on right now.
I've done that 2-3 times with the regular CL model but I have a problem here where I should connect the cooling fan?
Every free pin there (with a high voltage) seems to be 230-240V and I've tested all the comibnations (original seating is J11+J14). The fan works at around 120V. So, is there any way to connect it to 120V or do I need to change the fan to european model?
Am I missing something here?
Nic to see that the boards are thicker and everything is just better done that the regular ones made far East. This is the first Heritage I work on right now.
I've done that 2-3 times with the regular CL model but I have a problem here where I should connect the cooling fan?
Every free pin there (with a high voltage) seems to be 230-240V and I've tested all the comibnations (original seating is J11+J14). The fan works at around 120V. So, is there any way to connect it to 120V or do I need to change the fan to european model?
Am I missing something here?
Comment