First of all, are schematics available for these yet?
The reverb tank is a 8EF... type. There’s an AT7 for the drive and half (?)of a the next 12ax7 for the return. Tanks is good, cable checks out ok. There’s lots of high voltage on the AT7 pin 1 376v
pin2 245
pin3 250
pin6 376
pin7 245
pin8 249
changed both tubes
Do these voltages look good?
thanks
The reverb tank is a 8EF... type. There’s an AT7 for the drive and half (?)of a the next 12ax7 for the return. Tanks is good, cable checks out ok. There’s lots of high voltage on the AT7 pin 1 376v
pin2 245
pin3 250
pin6 376
pin7 245
pin8 249
changed both tubes
Do these voltages look good?
thanks
Comment