I’ve proved around the board and the voltages where I was able to get a reading seem fine, Q10 is about 1.5v lower than the schematic shows, but that shouldn’t be the problem.
If it is the fet, do I just jump it or leave the drain or source detached?
When I turn the volume up it does distort, so I’m kind of thinking it’s not the new parts, but could it be something else?
If it is the fet, do I just jump it or leave the drain or source detached?
When I turn the volume up it does distort, so I’m kind of thinking it’s not the new parts, but could it be something else?
Comment