One thing I like about the Nichicon and Vishay caps I buy are the date codes.
You don't get that with MIEC and others. Who knows how old the caps you're getting are.
Announcement
Collapse
No announcement yet.
What are you using in way of Axial Lead Al Elect Caps these days?
Collapse
X
-
Originally posted by Drummer4gc View PostApologies if this takes the thread off topic, but I’m curious to know how you all install radials in place of axials. I’ve done it and it’s usually simple enough to figure out a way to make things fit, but I’m curious to know what strategies you all use to keep the work clean looking, reliable, etc. Pics of clean work would be great to see!
nosaj
- Likes 1
Leave a comment:
-
Apologies if this takes the thread off topic, but I’m curious to know how you all install radials in place of axials. I’ve done it and it’s usually simple enough to figure out a way to make things fit, but I’m curious to know what strategies you all use to keep the work clean looking, reliable, etc. Pics of clean work would be great to see!
Leave a comment:
-
Originally posted by g1 View Posthttps://www.tubesandmore.com/product...5-c-axial-lead
justradios is another source for caps. They were selling MIEC, which get fairly good reviews. https://www.justradios.com/axialelectrolytics.html
nosaj
- Likes 2
Leave a comment:
-
Just my limited and humble experience, but...
If you want cheap and good enough then go with Xicon. I've avoided them in the past because of their overtly east Asian/bargain presence :-/ That's my own hang up but it comes from a time when big corps were lowballing everything they were having manufactured in east Asia. That's no fault of the manufacturer and I know that. They'll make whatever you want if you're paying. Probably no longer applicable? And I've never had any problems any time I've used the Xicon AL electros. Unlike some boutique-y brands I no longer patronize.
If you want absolute quality then bite the bullet and start retrofitting radial caps. There are plenty of good ways to do this and I'll bet once you you get your mojo working it'll be no great shakes for you. I've been a devotee of Nichicon PW series caps for a several builds and repairs and I like them a lot. Great specs, decent price. Also east Asian, BUT the company never had a foothold in the 'more cheaper more better' market like Xicon was targeting.
I know I'm coming off a little racist here. I tried to explain the perspective. Just working with the information as it happens because what else to do.
JM2C and sorry if I've offended anyone.
- Likes 1
Leave a comment:
-
Originally posted by nevetslab View Post
from Antique. Today, I didn' t see the MOD brand caps even listed...not sure why.
justradios is another source for caps. They were selling MIEC, which get fairly good reviews. https://www.justradios.com/axialelectrolytics.html
Leave a comment:
-
Originally posted by xtian View PostSteve, do you have a reseller account at cedist.com? You certainly qualify. That will save you some money.
Leave a comment:
-
Xicon and pretty much any of the xxxcon caps are good quality. I've used Xicon over the years many times with no problems at all.
I tend to use a lot of F&T, but use any of the xxxcon caps also depending on pricing and what is available. For new builds I've been transitioning over to radial caps.
Greg
- Likes 2
Leave a comment:
-
Originally posted by garytoosweet View PostI think you pretty much covered it.
I usually go with F&T for HV/filters and Vishay for most other things.
The F&T 100uf/100V is also very reasonably priced. They started to offer 25/25 but the cost is very high.
The 'MOD' caps are made by Cherry in Brazil.Very inexpensive.
Leave a comment:
-
Originally posted by xtian View PostSteve, do you have a reseller account at cedist.com? You certainly qualify. That will save you some money.
Leave a comment:
-
Steve, do you have a reseller account at cedist.com? You certainly qualify. That will save you some money.
Leave a comment:
-
For high voltage applications, I mainly use F&T. For low voltage its also F&T, but I have been using a lot of Vishay over the past few years, both in caps and resistors. I like their metal film resistors because they're brown, and look a little more vintage than bright blue.
Leave a comment:
-
I think you pretty much covered it.
I usually go with F&T for HV/filters and Vishay for most other things.
The F&T 100uf/100V is also very reasonably priced. They started to offer 25/25 but the cost is very high.
The 'MOD' caps are made by Cherry in Brazil.Very inexpensive.
Last edited by garytoosweet; 05-13-2021, 09:18 PM.
Leave a comment:
-
What are you using in way of Axial Lead Al Elect Caps these days?
Not having spent hundreds of dollars to buy inventory of Nichicon Axial Leaded Aluminum Electrolytic Caps before they discontinued that form factor a year or so ago, I'm now seeing the reality of what's now available thru normal distribution (unless you're a manufacturer). Yes, I know one CAN adopt radial lead parts to fit into where the original layout was set up for Axials. So, just looking thru Mouser, Digi-Key, Allied, Newark and some other sources, a 47uF/63V Axial cap....you're left with having to by CDE/Illiinois brand for under a buck, Vishay/BC brand for well over $2, Kemet for over $3. TAW Electronics is still down the street from me in Burbank, and they carry/represent Xicon in Axial Lead Caps. I've never used them, Newark carries something called Multipro...I thought I stored the data sheet in my files, then didn't find it.
Applications here are replacements for cathode bypass or bias supply. I've been buying FT and some other brand thru Antique Electronic Supply. They carry a brand called Mod Electronics that I know nothing about, but did order some 20uF/500V parts to have a look at.
Who are other viable sources for Axial lead Aluminum Electrolytic caps these days?
Tags: None
Leave a comment: