Anyone worked on one of these ? Cool project came along --one of those 6G15 stand alone Fender reverb heads .
Got it up and running , needed new diodes , 3 prong ac cable , and a 12ax7. The unit passes signal fine and isnt noisy , but , No reverb !
All the voltages listed on the scem check out good , ive swapped all tubes , swapped rca type cables , and tanks .
This thing is all original inside and i dont see any leaking electrolytics .
Should i see any voltage at the rca jacks ? i have 0 vdc
any ideas ?
i can hear the Tone control working , but not the other 2 controls
Fender-Reverb-6G15-Schematic.pdf
Got it up and running , needed new diodes , 3 prong ac cable , and a 12ax7. The unit passes signal fine and isnt noisy , but , No reverb !
All the voltages listed on the scem check out good , ive swapped all tubes , swapped rca type cables , and tanks .
This thing is all original inside and i dont see any leaking electrolytics .
Should i see any voltage at the rca jacks ? i have 0 vdc
any ideas ?
i can hear the Tone control working , but not the other 2 controls
Fender-Reverb-6G15-Schematic.pdf
Comment