Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Zenamp h&k blower output fuses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by georage View Post
    the transistors get to 113 degrees C during a light volume with stereo music playing.
    Same for both channels?

    Originally posted by Enzo
    I have a sign in my shop that says, "Never think up reasons not to check something."


    Comment


    • #17
      Yep...both channels...im using an infrared thermometer gun....so there is something giving that reading on both channels. Although im not too alarmed by that number. I can turn the amp off and feel around bare-handed and cannot feel anything hot. I have to wait about 10 seconds, and then the caps drain down to a safe voltage.

      Idk guys. I bet if i put a 4 ohm load on the bad channel it would short the collector-emitter junction again. I didnt find anything....sorry

      Comment


      • #18
        I don't think that high transistor temperature is normal at low output.
        Are the transistors well mounted to their heatsinks?
        - Own Opinions Only -

        Comment


        • #19
          ...... and, did you get the replacement transistors from a reliable source? There are lots of fakes out there.
          "I took a photo of my ohm meter... It didn't help." Enzo 8/20/22

          Comment


          • #20
            Nope it popped with 8ohms nothing got hot...nothing sounded weird. Just playing nice quiet guitar and the pop! Dimbulb lit up and it was gone again.....

            Comment

            Working...
            X