Eden E300 Low, distorted output

[ca7922303]

Only P2 I'm finding does not have a pin 5 I don't believe. Can you verify where it is. Thanks.

photo of P2

[Jon Snell]

A better photograph of the amplifier would help as it is appears to be not the same as most E300s that I have worked on.
You have pinpointed the AC feed for the power supply, we are looking for the mute line on the signal feed side. See diagramme

Please show complete model number on rear panel for more idea on what it is. The E300 is a valve amplifier, this E300 is not.

[ca7922303]

A better photograph of the amplifier would help as it is appears to be not the same as most E300s that I have worked on.
You have pinpointed the AC feed for the power supply, we are looking for the mute line on the signal feed side. See diagramme

Please show complete model number on rear panel for more idea on what it is. The E300 is a valve amplifier, this E300 is not.

Model #

[ca7922303]

A better photograph of the amplifier would help as it is appears to be not the same as most E300s that I have worked on.
You have pinpointed the AC feed for the power supply, we are looking for the mute line on the signal feed side. See diagramme

Please show complete model number on rear panel for more idea on what it is. The E300 is a valve amplifier, this E300 is not.

Photos of boards

[ca7922303]

A better photograph of the amplifier would help as it is appears to be not the same as most E300s that I have worked on.
You have pinpointed the AC feed for the power supply, we are looking for the mute line on the signal feed side. See diagramme

Please show complete model number on rear panel for more idea on what it is. The E300 is a valve amplifier, this E300 is not.

I'm also noticing that all controls have an effect on output signal except for 'gain'. It only kills the signal at '0' but does not increase the volume at any point from '1-10'.

[ca7922303]

Swapped gain pot for enhance pot and now have gain control. Enhance control doesn't seem to be working as before swap but now have correct output. Will order W10k pot for enhance control.

[LeeP]

wow looks like such an old design for a current model. Im actually an authorized repair center for Eden (I think) and Ive never had anyone bring one of those in to me. Thanks for the pics.

Hi
I need a replacement transformer for Eden e300. Do you know which one I should order. A link would be so useful!
Lee

[The Dude]

Have you contacted Eden themselves?

https://www.edenamps.com/contact/

[clintronics]

Hi
I need a replacement transformer for Eden e300. Do you know which one I should order. A link would be so useful!
Lee

Ive been informed Im no longer Eden and to use dude's link https://www.edenamps.com/contact/