Tweet
What I have in my hands is 2010s little AC4TV amp with "power attenuator" roatry potentiometer with 3 positions (1/4W, 1W and 4W full power). Switch went bad inside, probably someone tried to turn it with force that's my guess... Anyway, it's soldered on a little board. Tried to show where the pins of the pot are soldered via violet circles.
Managed to trace the exact part, but it's unavailable in Europe, but I could try to fit something similar (pic below). But /i found only "3-poistions and 4-circuit" version (or version with more than 4 circuits). Quite dont get how I solder it to that board, can someone point me how to do it right?
Managed to trace the exact part, but it's unavailable in Europe, but I could try to fit something similar (pic below). But /i found only "3-poistions and 4-circuit" version (or version with more than 4 circuits). Quite dont get how I solder it to that board, can someone point me how to do it right?
Comment