Announcement

Collapse
No announcement yet.

LANGNER DCP-1 preamp schematic

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    LANGNER DCP-1 preamp schematic

    Hello guys,
    have you ever heard of it? A friend found this schematic, it seems legit for me, can anyone confirm?
    I would like to build a clone of the most interesting channel, so any advice is welcome.
    270 V for high gain is a bit low, isn'it?
    Thanks
    Attached Files
    Last edited by tepsamps; 10-18-2021, 09:45 PM.
    Tags: None
  • #2
    Did you Google "Todd Langner" or "DCP-1"? You'll find lots of info and at least one preamp for sale.

    “If you have integrity, nothing else matters. If you don't have integrity, nothing else matters.”
    -Alan K. Simpson, U.S. Senator, Wyoming, 1979-97

    Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law.

    https://sites.google.com/site/stringsandfrets/

    Comment

    • #3
      [QUOTE=tepsamps;n943614] 270 V for high gain is a bit low, isn'it?/QUOTE]

      There are more gain stages in the high gain channel than you'd usually expect and the preamp maybe clips a lot more as a result. I'm thinking more fizzy metal distortion rather than classic rock crunch. Lowering the B+ decreases headroom.

      • Likes 1

      Comment

      • #4
        You can just drop the plate voltages with a resistor. I've done this and it works

        Comment

        Previous template Next
        Working...
        X