Tweet
Recently , I bought a Decibel Eleven Loop Expander to add foot pedals into my MIDI set up , it has a buffer and I added a Mosky Pure Buffer at the tail end of my pedalboard.
So I removed my two VHT Valvulators 1's from my pedalboard and will place them between the balanced left and right out puts of my Digitech 2112 SGS , then into the two VHT Valvulator 1's and finally into my two Crate Power Blocks.
Is there a possibility of damaging my set up ?
So I removed my two VHT Valvulators 1's from my pedalboard and will place them between the balanced left and right out puts of my Digitech 2112 SGS , then into the two VHT Valvulator 1's and finally into my two Crate Power Blocks.
Is there a possibility of damaging my set up ?