Tweet
I've had the idea for a while to rewire my Strat copy so it has only 4 pickup combinations: N/M series, N/M parallel, M/B parallel, and M/B series. With the RWRP middle pickup all positions would be hum-cancelling.
Figuring out the switching is one of the most challenging and fun (to me) aspects of this so I was pleased when I finally came up with this scheme. This would allow the use of a common DP4T rotary or perhaps one of those fancy blade switches (although I can't really bring myself to spend more than a couple bucks on a switch).
Anyway I thought I would share the schematic in case anyone else might find it useful, and invite comments or improvements on the design.
Cheers,
Alex
Figuring out the switching is one of the most challenging and fun (to me) aspects of this so I was pleased when I finally came up with this scheme. This would allow the use of a common DP4T rotary or perhaps one of those fancy blade switches (although I can't really bring myself to spend more than a couple bucks on a switch).
Anyway I thought I would share the schematic in case anyone else might find it useful, and invite comments or improvements on the design.
Cheers,
Alex