Yes, the SA has the magnet running through both coils like the old Duncan/Dimarzio designs. I've made a few of those and they are very bright sounding pickups. This is probably why they are always wound hot.
The EMG design doesn't run the coils in series, but instead has each one connected to one of the inputs on the op amp.
Here's the schematic for an 81. I guess it's the same one you have? I didn't make this so I can't verify it. It was traced from an actual circuit board. I'd imagine the SA is similar. Also a photo of the inside of an SA.
The EMG design doesn't run the coils in series, but instead has each one connected to one of the inputs on the op amp.
Here's the schematic for an 81. I guess it's the same one you have? I didn't make this so I can't verify it. It was traced from an actual circuit board. I'd imagine the SA is similar. Also a photo of the inside of an SA.
Comment